Ledwood 75 Activity Band + True Wireless Headphones Set

HEADSET FEATURES.

- Model:

LD-TWS-XT91.

- Bluetooth version:

5.0 + EDR.

- Bluetooth mode:

A2DPV1.3// AVDTPV1.3 AVCTPV1.4.

- GAVDPV1.3 HFPV1.7 AVRCPV1.6 //// HIDV1.0 EDRBLE.

- Bluetooth frequency:

2.4 GHz.

- Bluetooth range:

10 metres (unobstructed).

- 2 speakers:

5 mW.

- Built-in microphone.

- Charger case:

USB 5 V/DC.

- Battery capacity:

35 mAh each.

- Charging station:

250 mAh.

- Playing time:

3 hours per earphone in single use / 2 hours and 30 minutes in pairing mode.

- Standby time:

- 100 hours per earpiece in single use.

- 60 hours in pairing mode.

- Max.

sound pressure:

= 90 dB.

- Frequency response:

50Hz-20KHz.

- Impedance:

30 Ohms.

- Accessories:

charger, USB cable, headphone caps.

INSTRUCTIONS FOR USE OF THE HEADPHONES.

1 The headphones are automatically switched on and paired when they are removed from the charging case.

If this is not the case, press the.

buttons on the headset for 3 seconds to switch them on manually.

The LED indicator on one headset will turn off while the other continues to flash.

The headsets are now paired.

2 Activate the Bluetooth connection on your device (e.g.

your phone) and select ´´KEPLER´´ to connect.

3 Store the headset in the box.

They will automatically switch off and start charging.

They will stop charging when the battery is full.

4 The left and right earphones can be operated separately.

5 The headset will automatically turn off after three minutes without connection to a device.

CAUTION.

1 If the headphones have been successfully paired with the device the first time, it is not necessary to repeat the pairing procedure when using the headphones again.

2 If pairing does not work the first time, disconnect the source device, turn off the headset and try again.

MULTI-FUNCTION BUTTON MAKE PHONE CALLS.

A 1 press, right or left - answer or hang up the call.

B Long press right or left for 1.5 seconds - reject the call.

PLAYBACK.

A 1 press, right or left - play or pause.

B 2 presses, left - next track, right - previous track.

C 3 presses, left:

volume up, right - volume down.

D Long press right or left (3 seconds) - switch on/off.

VOICE ASSISTANT.

Press the button on either headset for 1.5 seconds to activate the voice assistant.

CHARGING THE HEADSET.

When the headset is charging, the LED indicator will be red.

It will turn off when the headset is charged.

CHARGING THE STATION.

When the docking station is charging connected to a PC with a USB C cable, the red indicator on the back of the charging case will flash slowly.

If it is off, charging is complete.  With the charging case fully charged, you can charge the headset three times.

1 CHARGING THE WRISTBAND.

Check that the wristband has enough battery power when you use it for the first time.

Charge the wristband if it does not and it will turn on automatically.

CHARGING INSTRUCTIONS.

Detach the wristband body from the strap.

Connect it to the USB port of your computer or your phone´s adapter.

POWER ON/OFF.

1) To turn on the device, press the multifunction button for 4 seconds to turn on the device with vibration.

2) To turn off the device, press the multifunction button for more than 4 seconds, select power off by pressing again.

If no operation is performed, the system will turn off after 5 seconds.

OPERATION OF THE WRISTBAND.

1) With the device switched on, briefly press the multifunction button to illuminate the display with the date and time information.

2) With short taps on the button, you can switch between the different screens.

3) When you switch to the heart rate and blood pressure monitoring screen, the wristband will automatically start monitoring.  The result will be displayed in 40 s and then the display will automatically turn off.

4) To pair, search for ´´TRACK´´ in the Bluetooth settings of your phone.

2 INSTALL THE WRISTBAND APP ON YOUR PHONE.

To download and install ´´LEFUN HEALTH´´, scan the QR code on the second page or search the app shop.

System requirements:

Android 5.0 and iOS9.0 or later, Bluetooth 4.0 support.

3 BRACELET PAIRING.

When using the wristband for the first time, connect to the APP to set the time and date.

Otherwise the pedometer and sleep monitoring will lose accuracy.

The wristband will sync automatically after connecting.

Open the app and tap on the settings icon.

My device.

Tap on the screen and swipe down to refresh the available devices.

Select your device to pair it.

After the wristband connects to the app, the app will save the automatic pairing information when you open it or when running in the background.

Check that your wristband has all the necessary system permissions to perform the installation or set them on your phone.

They will be required for background execution and reading of contact information.

4 FUNCTIONS AND SETTINGS OF THE APP Personal information.

Enter your details after opening the app.

In Settings - Personal Settings, you can define your gender, age, height and weight, to provide accurate distance and calorie calculations.

You can also set your daily exercise and sleep goals and track them daily.

Set the sedentary reminder time.

You can also turn off the notification message for this feature.

NOTIFICATIONS Incoming call.

With both devices connected and call alerts turned on, the wristband will vibrate when a call comes in and the name or number of the caller will appear on the display.

the name or number of the caller will appear on the screen.

Permissions must be set for the app to access the phone´s contacts.

SMS messaging.

With both devices connected and SMS reminders enabled, the wristband will vibrate when an SMS is received.

Other reminders.

With both devices connected and with the other reminders function activated, the wristband will vibrate when your phone receives notifications from WeChat, QQ, Facebook and others.

You need to enable these notifications on your phone and set permissions for the app to access them.

Vibrating reminder.

If enabled, the wristband will vibrate when a call or other notification comes in.

If disabled, only the reminder will be displayed on the screen, without vibration.

Sedentary reminder.

You can activate or deactivate the sedentary reminder function.  You can set the reminder interval in your profile.

The wristband will notify you if you sit for longer than this interval.

Tips for Android users.

The reminder function must be set to allow LEFUN HEALTH to run in the background.

It is recommended to add this app to the list of trusted applications and configure all permissions to enable all functions.

5 FUNCTIONS AND APPLICATION SETTINGS.

Smart Alarm.

With both devices connected, you can set three alarms and synchronise them with the wristband.

You can use the alarms offline.

After synchronisation, even without connection to the app, the wristband will trigger the alarms at the set times.

Wristband display settings.

In this option, you can configure the display of your wristband screens.

The screens of the enabled functions will scroll one by one when you press the multifunction button and the non-enabled ones will not appear.

Searching for the wristband.

With both devices connected, select the search option on the wristband and the wristband will vibrate to get your attention.

´´Shake to take selfies.

With both devices connected, select the ´´shake to take´´ option in the app, shake the wristband and the app will automatically take photos after a countdown of 3.

Give the app permissions to access the camera and create a photo album for storage.

6 DISPLAY INSTRUCTIONS.

Date and time After pairing with your phone, the date and time will be automatically set on the wristband.

Pedometer Wear your wristband to automatically record your daily activity.  You can see how many steps you have taken during the day in real time.

Distance Depending on your daily activity and personal profile, the distance travelled will be displayed.

Calories You will get information about calories burned based on your distance and personal profile.

Heart rate and blood pressure Switch to the heart rate and blood pressure screen.

The wristband will automatically start the measurement and the result will be displayed in 40 seconds.

This function works only if the wristband has a heart rate or blood pressure sensor.

Sleep monitoring The wristband will automatically monitor your sleep at night.

It will detect your sleep phase with the time of deep sleep, light sleep and wake time and calculate your sleep quality.

The results can be viewed in the app.

Note.

The wristband will track your sleep only if you wear it.

Leaving the wristband nearby will not activate sleep monitoring.  Synchronise your wristband with the app after 9:00 a.m.

the next day to upload and view the data.

7 SPECIFICATIONS.

- Device type:

Smart wristband.

- Battery:

Lithium polymer.

- Vibration motor:

Yes.

- Connectivity:

Bluetooth 4.0.

- Operating temperature:

-10°C~ 50°C.

- Sensor:

Low power accelerometer.

- System requirements:

Android 5.0 and IOS9.0 or later.

8 TIPS.

- Remove the wristband before showering or bathing.

- Connect the wristband when synchronising data.

- Use the 5V USB charger.

- Protect the wristband from extreme temperatures and water.

- If the application crashes or restarts, check the phone memory, turn off and try again or exit the app and open it again.

9 COMPONENTS.

Charger / Charging cable / Wrist strap / Manual and packaging.

Would like to buy Ledwood 75 Activity Band + True Wireless Headphones Set? You are at the right place! In the category of Smartbands at the online fashion store you can find a big variety of different models at the best price. Find the best fashion products, that adapt to your needs at dressinn. Are you looking for a gift? Don´t miss also our Accessories sales.